Poster Print > Science > Space Exploration > Space Shuttle
Poster Print : Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. Creator: Unknown
![View Heritage Images Prints Heritage Images](/templates/printstore/3061/images/logo_60x60.gif)
Poster Prints From Heritage Images
Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. Creator: Unknown
Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. NASA used this Space Shuttle orbiter concept model in wind tunnel tests to learn about the flight characteristics of the vehicles shape. Although the orbiter would spend most of its time in space, its aerodynamic shape would affect its passage through the atmosphere during launch and descent. Straight wing designs were considered and tested; however a delta wing design was finally chosen, in part to meet U.S. Air Force requirements for high cross-range maneuverability during final descent. Delta wings meant a heavier orbiter and more surface heating during reentry, but they also permitted the orbiter to glide farther without power to reach a runway. NASA transferred a variety of wind tunnel and concept models to the Museum after settling on the final Space Shuttle design
Heritage Images features heritage image collections
Media ID 23877289
© Heritage Art/Heritage Images
Aerodynamics Air And Space Museum Aviation Flight Model Nasm National Air And Space Museum Research Space Space Shuttle Space Travel Spacecraft
18x24 inch Poster Print
Step into the thrilling world of space exploration with our stunning Media Storehouse Poster Print of the Unknown Model, Space Shuttle - Final Orbiter Concept from the 1970s-2000s. This captivating image, sourced from Heritage Images, showcases NASA's meticulously crafted model used in wind tunnel tests during the development of the Space Shuttle vehicles. A must-have for space enthusiasts and history buffs, this print brings the awe-inspiring journey of the Space Shuttle program right into your home or office. Experience the power and innovation of NASA's engineering prowess with every glance.
Poster prints are budget friendly enlarged prints in standard poster paper sizes. Printed on 150 gsm Matte Paper for a natural feel and supplied rolled in a tube. Great for framing and should last many years. To clean wipe with a microfiber, non-abrasive cloth or napkin. Our Archival Quality Photo Prints and Fine Art Paper Prints are printed on higher quality paper and the choice of which largely depends on your budget.
Poster prints are budget friendly enlarged prints in standard poster paper sizes (A0, A1, A2, A3 etc). Whilst poster paper is sometimes thinner and less durable than our other paper types, they are still ok for framing and should last many years. Our Archival Quality Photo Prints and Fine Art Paper Prints are printed on higher quality paper and the choice of which largely depends on your budget.
Estimated Product Size is 61.6cm x 46.3cm (24.3" x 18.2")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) orientation to match the source image.
FEATURES IN THESE COLLECTIONS
> Architecture
> Tunnels
> North America
> United States of America
> Related Images
> Science
> Space Exploration
> Related Images
> Science
> Space Exploration
> Space Shuttle
EDITORS COMMENTS
This print showcases a model of the final orbiter concept for the iconic Space Shuttle, dating back to the 1970s-2000s. The creator of this remarkable piece remains unknown, adding an air of mystery and intrigue to its history. NASA utilized this model in wind tunnel tests to gain valuable insights into the flight characteristics and aerodynamic shape of the spacecraft. While spending most of its time in space, it was crucial for the orbiter's design to consider its passage through Earth's atmosphere during launch and descent. Various wing designs were explored, including straight wings; however, a delta wing configuration was ultimately chosen due to U. S. Air Force requirements for enhanced cross-range maneuverability during final descent. The adoption of delta wings came with trade-offs such as increased weight and higher surface heating during reentry. Nevertheless, they offered significant advantages by enabling the orbiter to glide further without power until reaching a runway. After settling on the final design for the Space Shuttle, NASA transferred numerous wind tunnel models and concept prototypes to be preserved at the National Air and Space Museum (NASM). This particular model found its rightful place among these artifacts that symbolize America's pioneering spirit in aviation and space exploration. Crafted from aluminum epoxy with a clear protective coating steel finish, this heritage art piece serves as both an educational tool and a testament to scientific innovation. Its presence within NASM stands as a reminder of humanity's relentless pursuit of knowledge beyond our planet's boundaries - truly embodying our nation's rich aerospace heritage.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Basket.