Metal Print > Science > Space Exploration > Space Shuttle
Metal Print : Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. Creator: Unknown
Metal Prints From Heritage Images
Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. Creator: Unknown
Model, Space Shuttle, Final Orbiter Concept, 1970s-2000s. NASA used this Space Shuttle orbiter concept model in wind tunnel tests to learn about the flight characteristics of the vehicles shape. Although the orbiter would spend most of its time in space, its aerodynamic shape would affect its passage through the atmosphere during launch and descent. Straight wing designs were considered and tested; however a delta wing design was finally chosen, in part to meet U.S. Air Force requirements for high cross-range maneuverability during final descent. Delta wings meant a heavier orbiter and more surface heating during reentry, but they also permitted the orbiter to glide farther without power to reach a runway. NASA transferred a variety of wind tunnel and concept models to the Museum after settling on the final Space Shuttle design
Heritage Images features heritage image collections
Media ID 23877289
© Heritage Art/Heritage Images
Aerodynamics Air And Space Museum Aviation Flight Model Nasm National Air And Space Museum Research Space Space Shuttle Space Travel Spacecraft
16"x24" (61x41cm) Metal Print
Experience the awe-inspiring history of space exploration with our Media Storehouse Metal Prints featuring the Unknown Model of the Space Shuttle Final Orbiter Concept from Heritage Images. This captivating image showcases NASA's meticulously crafted model used in wind tunnel tests during the 1970s-2000s, providing valuable insights into the Space Shuttle's unique shape and flight characteristics. Bring this iconic piece of space history into your home or office with our high-quality Metal Prints, expertly crafted to bring vibrant colors and sharp details to life. Each print is made-to-order and coated with a durable protective finish, ensuring a long-lasting and stunning display. Relive the thrill of space exploration and add a touch of history to your space with Media Storehouse's Metal Prints.
Made with durable metal and luxurious printing techniques, our metal photo prints go beyond traditional canvases, adding a cool, modern touch to your space. Wall mount on back. Eco-friendly 100% post-consumer recycled ChromaLuxe aluminum surface. The thickness of the print is 0.045". Featuring a Scratch-resistant surface and Rounded corners. Backing hangers are attached to the back of the print and float the print 1/2-inch off the wall when hung, the choice of hanger may vary depending on size and International orders will come with Float Mount hangers only. Finished with a brilliant white high gloss surface for unsurpassed detail and vibrance. Printed using Dye-Sublimation and for best care we recommend a non-ammonia glass cleaner, water, or isopropyl (rubbing) alcohol to prevent harming the print surface. We recommend using a clean, lint-free cloth to wipe off the print. The ultra-hard surface is scratch-resistant, waterproof and weatherproof. Avoid direct sunlight exposure.
Made with durable metal and luxurious printing techniques, metal prints bring images to life and add a modern touch to any space
Estimated Product Size is 61.5cm x 41.2cm (24.2" x 16.2")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) orientation to match the source image.
FEATURES IN THESE COLLECTIONS
> Architecture
> Tunnels
> North America
> United States of America
> Related Images
> Science
> Space Exploration
> Related Images
> Science
> Space Exploration
> Space Shuttle
EDITORS COMMENTS
This print showcases a model of the final orbiter concept for the iconic Space Shuttle, dating back to the 1970s-2000s. The creator of this remarkable piece remains unknown, adding an air of mystery and intrigue to its history. NASA utilized this model in wind tunnel tests to gain valuable insights into the flight characteristics and aerodynamic shape of the spacecraft. While spending most of its time in space, it was crucial for the orbiter's design to consider its passage through Earth's atmosphere during launch and descent. Various wing designs were explored, including straight wings; however, a delta wing configuration was ultimately chosen due to U. S. Air Force requirements for enhanced cross-range maneuverability during final descent. The adoption of delta wings came with trade-offs such as increased weight and higher surface heating during reentry. Nevertheless, they offered significant advantages by enabling the orbiter to glide further without power until reaching a runway. After settling on the final design for the Space Shuttle, NASA transferred numerous wind tunnel models and concept prototypes to be preserved at the National Air and Space Museum (NASM). This particular model found its rightful place among these artifacts that symbolize America's pioneering spirit in aviation and space exploration. Crafted from aluminum epoxy with a clear protective coating steel finish, this heritage art piece serves as both an educational tool and a testament to scientific innovation. Its presence within NASM stands as a reminder of humanity's relentless pursuit of knowledge beyond our planet's boundaries - truly embodying our nation's rich aerospace heritage.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Basket.
